Spaulding-lighting RDI Radius Manuel d'utilisateur télécharger pdf (Page 2)

TRP & RDI 30LED INSTALLATION INSTRUCTIONS (PG 2/2)

SAVE THESE INSTRUCTIONS

701 Millennium Boulevard Greenville, SC 29607 (864) 678-1000

Step

WIRING

(See Fig.

)

POWER MUST BE OFF.

(WIRING MUST BE PERFORMED BY A QUALIFIED

ELECTRICIAN)

CAUTION! SHOCK HAZARD, DO NOT CONNECT RED AND

WHITE WIRES TOGETHER UNTIL ALL OTHER

CONNECTIONS HAVE BEEN MADE.

• Wire service leads to fixture power leads according to local

and National Electric Codes.

• Luminaire is equipped with a universal voltage driver capable of

120V-277V input.

• For direct wire connections, connect ground wire to green

wire. Connect

black to black and white to neutral then push

connections back inside J-box.

FIG. 2

FIG. 3

NOTE: DO NOT OPEN THIS PRODUCT UNLESS INSTRUCTED BY STEPS INCLUDED IN

THESE INSTRUCTIONS OR BY HUBBELL LIGHTING TECHNICAL SUPPORT PERSONNEL.

FIXTURE HAS BEEN DESIGNED WITH EASY TO INSTALL MOUNTING BRACKETS.

93051033 - Page 2 of 2

STEP III FIXTURE MOUNTING (See Fig. 3)

• Hold fixture at a slight angle, slide over mounting

plate and rotate upward to capture plate.

• Tighten screw (G) securely.

• Check to ensure secure mount.

• Energize product.

WARNING:

NOT DESIGNED FOR UPLIGHT

FIXTURE TO BE INSTALLED FACE

DOWN ONLY

www.spauldinglighting.com

1 2

Pas de commentaire

Spaulding-lighting RDI Radius Manuel d'utilisateur Page 2